How do you join stratco guttering?

Specially designed Fascia Brackets attach to the rafters, then the Stratco steel fascia is simply clipped into place. Stratco Gutters can then be installed using the Stratco Gutter Suspension Clip, which attaches the gutter to the fascia.

Can you splice gutters together?

Joining gutter sections together is a fairly simple job. When installing metal gutters, the process involves overlapping the two pieces and riveting them together. PVC or vinyl gutters are designed to snap together easily but may require the use of gaskets or a sealant to ensure a waterproof connection.

How far apart should gutter brackets be?

Gutter hangers should always be placed at least every three feet for proper support (2 feet in northern climates where snow and ice can add additional weight on the gutters).

How do you join gutter downspouts?

Screw a downspout elbow to the outlet tube protruding down from the gutter. Hold another elbow against the house and cut a piece of downspout to fit between the two elbows. Use needlenosed pliers to slightly crimp the elbow to fit into the downspout (as shown). Fasten the parts together with pop rivets or screws.

How do you install a gutter slip joint?

How to Install a Slip Joint on Rain Gutters

  1. Place the top lip of the slip joint’s back over the top of the rear edge of the two gutter pieces.
  2. Wrap the slip joint around the outside of the two gutter pieces.
  3. Apply a bead of sealant on the inside of the gutter, between the ends of the gutter pieces and the slip joint.

What is a STRATCO gutters guide?

GUTTER & FASCIAINSTALLATION GUIDE FEATURES OF STRATCO GUTTERS OVERVIEW Stratco Gutters, Downpipes, Overflow Solutions and accessories are both fashionable and functional, enhancing the look of your home. Multiple solutions are offered to greatly reduce the risk of water damage.

What gutters and downpipes are compatible with STRATCO fascia?

Stratco manufactures a wide range of gutters and downpipes that are compatible with the Stratco Fascia system. These include the OG, Quad, Edge and Smoothline®gutters, to name a few.

How do you attach STRATCO gutters to fascia?

Stratco gutters can be fixed to fascia using brackets or the Stratco Suspension Clip, the system which has proudly received an Australian Classic Design Award. Dimpled fascia with Suspension Clips is an easy and reliable way to meet overflow requirements.

Can stop-ends and mitres be fabricated from gutter lengths supplied?

FABRICATE STOP ENDS, MITRES & DOWNPIPES (IF REQUIRED) If stop-ends, mitres, or downpipes are to be fabricated from the gutter lengths supplied (as opposed to using pre-made components) refer to fabrication instructions on page 18-20. Stratco offer a range of pre-made stop-ends, mitres, outlets and downpipes.