Can you make your own water based wipe-on poly?
For water borne polyurethane I use tap water or distilled water (never well water) as my thinning agent. To make your own wipe on polyurethane I recommend thinning to 50/50. One part polyurethane to one part thinning agent.
Can you rub on polyurethane?
Apply a liberal amount of Wipe-On Poly to a clean, soft, lint-free cloth and rub it into the wood. Let dry 2-3 hours. Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust.
How do I get a smooth finish with wipe-on poly?
Wash it first with dish soap and water, then lightly sand the old finish with 220-grit sandpaper. Vacuum off the dust, then apply the finish as usual. Apply at least two coats to achieve an even sheen.
Can Minwax Wipe on Poly be thinned?
The container of wipe-on say you can thin it, but the regular stuff says “do not thin”. Last edited by Kevin Guarnotta; 01-19-2013 at 9:11 AM. Thin ‘regular’ poly/varnish with mineral spirits, about 50/50. Yep.
Should I mix mineral spirits with polyurethane?
Thin your polyurethane with mineral spirits. The mineral spirits will provide a more forgiving coat of polyurethane and will also help any bubbles in the finish to burst before it sets up and dries.
How do you make polyurethane matte?
If you want to transform the sheen from high gloss to satin or matte, then using a hardening oil such as tung oil is a good way to do it. Apply a base coat of gloss water- or oil-based polyurethane, let it dry and scuff it with 220-grit wet/dry sandpaper. Apply a second coat.
What can I use to thin Minwax polyurethane?
Several substances can be used to thin polyurethane including turpentine, mineral spirits, paint thinner or, in some cases, water.
Is Minwax Wipe on Poly water or oil based?
Minwax Wipe-On Poly is the perfect oil based clear protective finish for your interior wood.
How do you mix polyurethane?
Start by mixing up your polyurethane with a stir stick, making sure everything is combined and mixed evenly. After mixing up the polyurethane measure out the amount you need. Since this process is so fast I like to mix mine as needed. I used a solo cup to measure mine because it has a lot of lines that make it easier for measuring.
How to mix mineral spirits with polyurethane?
Pour the mineral spirits in to the jar with the polyurethane, put the lid on, give it a good shake, and it’ ready to use. If I end up with leftovers after the job I like to label the mixture.
How do you get bubbles out of polyurethane?
I keep a can of spray poly handy in case of bubbles. A light mist knocks them out. After each coat, re-dip the roller in mineral spirits and put it into a zippered plastic bag for the next coat and leave the wet tray to dry. In a couple of hours, the dried poly just peels right out of the pan.
What are the best tips for applying oil-based polyurethane?
These tips and techniques for applying oil-based polyurethane produce virtually flawless results. They include using a roller, using wipe-on poly and above all controlling dust. Even though I’ve built dozens of cabinets and furniture pieces, I don’t consider myself a high-end finisher.